5#. Hi, Today I tried to fly my DJI Phantom 2 Vision plus everything seems okay after calibrating compass when I start DJI Vision app on my android cell the video feed was not showing up. First I thought something is wrong with camera, however I soon realize that camera is working fine as all pictures and videos I tried were saving successfully Unlike the Phantom 4, the Phantom 4 Pro has a rear-facing obstacle sensing system and left and right infrared obstacle sensors. The gimbal camera has a 1-inch CMOS sensor. A remote controller with a built-in display is also available at an additional charge. For more details, see our Phantom 4 Pro specifications page. Offline. 4#. The Vision plus only supports up to 32Gb cards. You can get it to recognize 64Gb but for that you'd need to format it with FAT32 which takes some special tools. Even if it works the question is how reliable is it and is it worth the risk to lose data just to use a 64Gb card?
terry. one you are right (QR Code) is the solution. first turn on your remote control then repeater then plane along with the camera to WI Fi on (STEPS AS ONE BY ONE). after this go to your phone dji vision app CONNECT THE WI FI TO YOUR PHONE (some times your phone if couldn't connect to the phantom just turn OFF other network connections to
If your camera isn't responding to the control wheel, check the gimbal advanced settings. Look for "Gimbal Pitch Smooth (0-30)" under each configuration. If it's set to 30 or near 30, the wheel won't work. Adjust it to around 20, and your wheel should control the gimbal pitch (camera movement up and down). This setting came with the app upgrade

Offline. 5#. According to your OP, you have a DJI Phantom 2 Vision. The black screen cannot be repaired on those. You would have to replace the camera. However, based on the image you provided, the camera is not binded to the range extender which means the FPV may be working just fine although it's not likely.

Phantom Announcement. Phantom 4 RTK. Phantom 4 Multispectral. Our Year 2023 - 4K. All my best wishes and a droneful 2024 2023 was really a joyfull year full of travels. We have seen p At the Top of the World. Stock Mavic 3 recording a climb to the top of the world. HUGE Firmware Update on the DJI Mini 4 Pro.
I was not able to get my tilt wheel to work, even though I was calibrating correctly. What I was not doing was to calibrate the controller using the DJI RC System Assistant_1.2 and then calibrating the controller again using the DJI Phantom 2 Vision Assistant_3.8 again. I was only calibrating the controller once. The tilt wheel works now. Thanks.

I purchased a NEW FC200 Camera for my Phantom 2 Vision to replace a previous one and for the life of me I can not get it to bind to the range extender. The QR Code reader in the settings of the Vision APP won't enable so I guess I have to install the MAC address manually but I don't know where to locate the MAC address for the new camera.

sVvk.
  • 2hoxg5cxjz.pages.dev/33
  • 2hoxg5cxjz.pages.dev/86
  • 2hoxg5cxjz.pages.dev/393
  • 2hoxg5cxjz.pages.dev/188
  • 2hoxg5cxjz.pages.dev/248
  • 2hoxg5cxjz.pages.dev/202
  • 2hoxg5cxjz.pages.dev/233
  • 2hoxg5cxjz.pages.dev/371

    • dji phantom 2 camera not working